|
|
Preparation of Porous K2Ti6O13 Whisker Preform by Spark Plasma Sintering
Chang-Hun Lee, Dong-Choul Cho, Won-Seung Cho, Chi-Hwan Lee
|
|
|
|
Fabrication of Porous Alumina Ceramics by Spark Plasma Sintering
Hyun-Cheol Shin, Won-Seung Cho, Seung-Yong Shin, Jun-Gyu Kim
|
|
|
|
Study on the Sinterability and Pellet Properties of Dy2O3-TiO2 Oxides
Han-Soo Kim, Chang-Yong Joung, Si-Hyung Kim, Byoung-Ho Lee, Young-Woo Lee, Dong-Seong Sohn, Sang-Hyun Lee
|
|
|
|
Redistribution of an Intergranular-Liquid Phase During Sintering of 1 mol%-Al2O3-doped Calcia-Stabilized Zirconia: Estimation by Impedance Spectroscopy
Jung-Hae Choi, Jong-Heun Lee, Doh-Yeon Kim
|
|
|
|
Fabrication of Al2O3/Fe-Ni Nanocomposites by Pressureless Sintering and their Magnetic Properties
Hong-Jae Lee, Young-Keun Jeong, Seok NamKung, Sung-Tag Oh, Jai-Sung Lee
|
|
|
|
Effect of the Amount of the Sintering Additives on the Microstructural Development and the Mechanical Properties of Silicon Nitride with Aligned Whisker Seeds
Byoung-Chan Bae, Dong-Soo Park, Hai-Doo Kim, Byung-Dong Han, Chan Park, Lin-Hua Zou
|
|
|
|
Sintering of Ni-Zn Ferrites by Microwave Hybrid Heating
김진웅, 최승철, 이재춘, 오재희
|
|
|
|
Effeet of Al2O3, MgO and SiO2 on Sintering and Hydration Behaviors of CaO Ceramics
Do-Kyung Kim, Churl-Hee Cho, Bong-Jin Goo, Kee-Sung Lee
|
|
|
|
Preparation of CaO-SiO2-B2O3 Glass-ceramics and Evaluation of Bioactivity Using in-vitro Test
Hyun-Seung Ryu, Jun-Hyuk Seo, Hwan Kim, Kug-Sun Hong, Deug-Joong Kim, Jae-Hyup Lee, Dong-Ho Lee, Bong-Soon Chang, Choon-Ki Lee
|
|
|
|
Variations in the Properties of LSGM System Electrolyte with Sr and Mg Addition and Sintering Conditions
Mi-Jai Lee, Sang-Sun Park, Byung-Hyun Choi
|
|
|
|
Sintering Properties of Artifical Lightweight Aggregate Prepared from Coal Ash and Limestone
Do-Su Kim, Churl-Kyoung Lee, Jong-Hyeon Park
|
|
|
|
Fabrication of Al2O3/Fe-Ni Nanocomposites by Atmosphere-controlled Sintering and their Properties
Hong-Jae Lee, Young-Keun Jeong, Sung-Tag Oh, Jai-Sung Lee, Tohru Sekino
|
|
|
|
Effect of Starting Material for MgG on the Mechanical Properties of Alumina Ceramics
조용익, 정상귀, 조성용, 김승재
|
|
|
|
Densification Behavior of Reaction-Bonded Silicon Nitride Prepared by Using Coarse Si Powders
이주신, 문지훈, 한병동, 박동수, 김해두
|
|
|
|
Sintering Properties of Renewed ${Al_2}{O_3}$Ceramics with Particle Size and Addition Amount of Recycling Powder
신대용, 한상목, 김경남
J. Korean Ceram. Soc. 2001;38(12):1123
|
|
|
|
Sintering and Mechanical Properties of Silicon Nitride Prepared with a Low-cost Silicon Nitride Powder
박우윤, 박동수, 김해두, 한병동
J. Korean Ceram. Soc. 2001;38(11):987
|
|
|
|
Effect of Sintering Conditions on Properties of PZT-based Thick Films Prepared by Screen Printing
Bong-Yeon Lee, Chae-Il Cheon, Jeong-Seog Kim, Jon-Chul Kim, Kyu-Seok Bang, Hyeung-Gyu Lee
J. Korean Ceram. Soc. 2001;38(10):948
|
|
|
|
Characteristics of Grain Orientation and Grain Boundaries of the $ZrB_2$-ZrC Composites Densified by Spark Plasma Sintering
Seung-Hwan Shim, Kyoung-Hun Kim, Kwang-Bo Shim
J. Korean Ceram. Soc. 2001;38(10):914
|
|
|
|
Change of Phase Transformation Temperature at Fabricated Membrane using Sol-gel Method
Hun Cheong, Duck-Kyun Choi, Deock-Soo Cheong
J. Korean Ceram. Soc. 2001;38(10):876
|
|
|
|
The Effect of $Bi_2$$O_3$Addition on the Microstructure and Magnetic Properties of YIG Prepared by RSP(Reaction Sintering Process)
김태옥, 장학진, 윤석영
J. Korean Ceram. Soc. 2001;38(8):710
|
|
|
|
The Effect of La-silicon Oxynitride on the Densification of ${Si_3}{N_4}$ Ceramics by Spark Plasma Sintering
Kyeong-Sik Cho, Sungjin Kim, Sung-Ho Beak, Heon-Jin Park, June-Gunn Lee
J. Korean Ceram. Soc. 2001;38(8):687
|
|
|
|
Microwave Dielectric Properties of Low Temperature Fired (${Pb_{0.45}}{Ca_{0.55}}$) [(${Fe _{0.5}}{Nb_{0.5}}$)$_{0.9}{Sn_{0.1}}$]$O_3$Ceramics with Various Additives
Jong-Yoon Ha, Ji-Won Park, Seok-Jin Yoon, Hyun-Jai Kim, Ki-Hyun Yoon
J. Korean Ceram. Soc. 2001;38(7):597
|
|
|
|
Fabrication of High Density TiN using a Spark Plasma Sintering Technique
심광보, 원종한, 김경훈
J. Korean Ceram. Soc. 2001;38(6):587
|
|
|
|
The Sintering Behavior of $ZrB_2$-ZrC Composites Sintered by Spark Plasma Sintering Process
심광보, 김경훈
J. Korean Ceram. Soc. 2001;38(6):582
|
|
|
|
Internal Structure and Weibull Modulus of $Al_2$$O_3$Ceramics Sintered with Addition of MgO
조용익, 유선균, 정상귀, 조성용, 김승재, 오꾸미야마사타로
J. Korean Ceram. Soc. 2001;38(5):479
|
|
|
|
Effect of Sintering Atmosphere on the Electrical Characteristics of the Grain Boundaries of $SrTiO_3$Ceramics Prepared from Semiconducting Calcined-powders
조남희, 박명범
J. Korean Ceram. Soc. 2001;38(4):380
|
|
|
|
Effects of the $V_2$$O_5$ Additive on ${ZnNb_2}{O_6}$ Microwave Dielectrics
Sang-Im Yoo, Dong-Wan Kim, Sung-Hun Wee, Kug-Sun Hong
J. Korean Ceram. Soc. 2001;38(4):308
|
|
|
|
Effects of the Sintering Atmosphere and Ni Content on the Liquid-phase Sintering of $TiB_2$-Ni
Suk-Joong L. Kang , Jin-Chul Baung, Yeon-Gyu Park, Eul-Son Kang, Yong-Kee Baek, Sug-Woo Jung
J. Korean Ceram. Soc. 2001;38(3):207
|
|
|
|
Oxygen Reduction Mechanism and Electrode Properties of (La,Sr)$MnO_3$-YSZ Composite Cathode for Solid Oxide Fuel Cell (Part II: Electrode Properties)
김재동, 김구대, 이기태
J. Korean Ceram. Soc. 2001;38(1):93
|
|
|
|
Effect of Sintering Atmosphere on the Electrical and Chemical Characteristics of the Grain Boundaries of $SrTiO_3$Ceramics Prepared from Semiconducting powders
박명범, 조남희
J. Korean Ceram. Soc. 2000;37(12):1150
|
|